|
|
|
 |
| The extensive range of circular spacers are designed and manufactured from quality plastics, for strength and stability.
The unique design offers accurate cover for 360 degrees. It will not twist when in position due to the in-built sleeves which adjusts to hold the bar firmly. As the size of the bar increases the cover remains the same.
The spacer concrete grey coloured is designed to be connected to the fitment so that it is in a vertical position, enabling it to rotate when the formwork is assembled. |
|
|
|
|
 |
| Clip Fast Bar chairs are made from quality materials and come in two head sizes to accommodate different bar sizes, one for bar 4mm to 20mm and the other for bar 20mm to 36mm. The convenient, economical range is designed for minimal exposure and coloured grey to match the concrete.
Greater stability and less exposure can be achieved where necessary with the use of clip-in bases, available in two heights, 15 and 25mm.
Both head sizes available in 15, 20, 25, 30, 35, 40, 45, 50, 60, 65 and 75mm cover.
Bases allow extra heights of 15 and 25mm. (Suits mesh chairs as well.) |
|
|
|
|
 |
| A versatile range of fast clip-on chairs for mesh support. Mesh Chairs are available in a wide range of cover sizes from 20mm with extensions and bases to 170mm. The chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability.
Colour coded grey, the chair bases and extensions have minimal exposure, ideal for tilt-slab, precast panel and suspended deck applications. Bases of either 15 or 25mm can be used to increase cover and stability and minimise exposure. Flat circular bases of 80mm diameter are also available for slab on ground applications. |
|
|
|
|
 |
| The bottom deck spacer supports both mesh and large bars in suspended decks, precast beams and panels, and tilt-up applications. As an alternative to wire chairs and concrete blocks in several applications, the bottom deck spacers are lighter, offer dual heights and have no rust problems.
Strong and stable, the spacers have 5 small dimples that are grey for minimum exposure. The dimples also allow for tie wire to be placed under the spacer for fixing reo if required.
Having supports for the reo with no clips, means one spacer fits all common reo sizes, saves steel-fixing time in horizontal applications, and the strain on hands pushing clips all day. |
|
|
|
|
 |
| The top deck chair supports both top mesh and top reinforcing bars in suspended decks, thick precast and tilt-up panels and any tall spacer applications, where strength and stability is critical. Load tested to over 300 kg, the chair leaves a minimal foot print and is supplied in a grey colour. Unlike wire alternatives, the top deck chair offers dual heights, will not rust or spread under normal construction loads and can still be handled in extreme heat. An added feature is a cross bar between the dual supports, to allow tying the reo with wire, if required. All top deck spacers are combination dual heights: 65/75mm, 90/100mm, 110/120mm, 130/140mm, 150/160mm, 170/180mm and 190/200mm. Ideal for Top reo in Suspended Decks or Beams, Thick Precast and Tilt-Up Panels, Thick Concrete Elements and All reo especially bars exceeding 16mm. |
|
|
|
|
 |
| The 750mm long plastic deck rail is a continuous spacer for formwork applications. Designed with sets of vertical legs at approximately 75mm centres and another vertical leg in between the sets; the deck rail is strong and stable, yet provides minimum exposure. Another feature is the male and female connection at either end to join rail on rail to any given length. Once connected the clip will not separate; a must for large projects. Clipping bar chairs onto the reinforcement or "chairing up" after the reinforcement has been placed is now eliminated. Ideal for Suspended Decks, Precast or Tilt-Up Panels, In situ and Precast Beams and Slabs on Blinding Concrete Available in heights from 25mm to 100mm in 5mm increments. |
|
|
|
|
 |
Foundation frames are lightweight, simple to use and offer a fast and efficient system to support mesh in concrete footings. The frames are easy to assemble, with a clip that tie the top and bottom mesh together and take the place of ligatures, stirrups and bogar clips. The frames come in 3 easy to identify sizes, 150/200mm, 250/300mm, 350/400mm and can be used on 8mm, 11mm and 12mm mesh. The frames clip onto the main longitudinal wire and the cross wire of the trench mesh at 900mm intervals creating a rigid frame. 6 metre lengths can be quickly assembled in 2 minutes outside the trench for placement after the trench is prepared. The bottom layer of the mesh is supported 50mm of the ground eliminating the need for trench mesh supports or bar chairs. |
|
|
|
|
 |
The heavy duty clip-on range is a replacement for concrete blocks and wire chairs in the heavy precast market, overcoming concrete compatibility, moisture retention and rust problems. A quick easy to use bar chair which is versatile, strong and robust. The heavy duty bar chair has been tested to 200kg in most cases, ensuring it will support heavy loads on site. Steel fixers walking freely on the bar or mesh, will be greatly impressed with its strength and stability. Ensuring minimum cover requirements has never been easier. The range is versatile in the range of bar sizes they can accommodate, Y12 and Y16 as a clip-on and also up to Y28 in non clip-on applications. Quality plastic used in the manufacture and the compact design adds to their strength and the grey colour blends in with the concrete. |
|
|
|
|
 |
The heavy duty intersection chair was designed for the precast industry and the production of "Super T Beams". The result is a design that takes advantage of the intersection to provide a chair that does not move. Clipped to both bars at the intersection, the chair is amazingly secure and will not swivel or turn. Ideal in vertical applications. The chairs are currently designed to accommodate combinations of Y16 bars and Y12 bars. Designed and manufactured from quality plastic for optimum performance, the chairs have been load tested to exceed 200kg. |
|
|
|
|
 |
Rocket mesh Chairs clip firmly to the mesh in either horizontal or vertical applications to provide accurate cover. Ideal for use in pipes, tanks and a variety of concrete products. The rocket chairs narrow base reduces exposure and can accommodate light mesh up to 5mm. Colour coded in a range of sizes 15, 20, 25, 30 & 35mm cover. |
|
|
|
|
 |
Standard Combination Chairs
A full range of the slab on ground chairs, manufactured from selected plastics for superior performance, tested to exceed loads of 200kg available in: 25 & 40, 50 & 65, 75 & 90, 85 & 100mm cover.
Clip- on Bar Chairs
The easy clip-on mechanism ensures correct placement, when walking on, or moving the reinforcing mesh, tested to exceed loads of 200kg available in 50 & 65mm combination style. |
|
|
|
|
 |
The Snake Spacer provides a quick, easy and economical method of supporting reinforcement in concrete slabs. The spacers are supplied in 2.0 metre lengths and range in size from 40mm up to 150mm.
The Snake Spacer is perfect for any precast application that calls for double reinforcement. By sitting on top of the first layer of reinforcement it eliminates exposure that plastic and wire chairs often leave. Ideal also for ground floor slabs where double reinforcement is required. |
|
|
|
|
 |
The SOG chairs are an economical, lightweight, easy to use alternative to metal chairs with bases in deep slab situations, with no voids under the bar or mesh and no rust problems. The easy clip-on system ensures the chair stays in place whilst the integral base saves time and labour placing separate bases. Ideally suited to commercial and civil projects such as deep slab on ground and road ways. The chairs have been load tested to exceed 500kg, and are available in 95, 100, 110, 120, 130, 140, and 150mm cover for bar or mesh up to 20mm. |
|
|
|
|
 |
Tilt-wall and Panel Chairs support single layered mesh in tilt-up, precast panels and some suspended deck applications. The chairs provide covers of 50 and 60mm as well as 65 and 75mm to suit popular panel thicknesses of 100, 120, 130, 150 and 170mm. With four strong stable legs the chair can support the mesh whilst walking over it without collapsing or tipping. Dimples located at the base of the legs ensure minimum exposure and the chair is coloured a consistent grey to match the concrete. The easy push on clip mechanism allows the chair to swing into a vertical position, when lowering the mesh into the form and suits all mesh sizes including Y12 bars. |
|
|
|
|
 |
The Trench Mesh Support has been designed with the clip-on at both sides to allow the support to be fitted prior to lowering the mesh into the trench. A non clip-on support in the middle allows for tolerances in the main wire spacing of the trench mesh. The maximum width of 290mm avoids interference with the sides of narrow trenches. This secure support can accommodate 8, 11, and 12mm bar or mesh, with 60mm cover. Ideal for residential applications such as strip footings, foundations and raft slabs. |
|
